Why Your Engine Slips between Gears & Why to Check it at Montgomeryville Acura

You may have noticed that your transmission has been slipping lately or that something just hasn’t felt right when you’re driving and changing speeds throughout Philadelphia, Lansdale and Doylestown.

A transmission slip, sometimes called “slipping between gears”, is a fairly common engine problem. If ignored, it can cause serious damage to your Acura. In order to understand why your engine slips between gears, you first need to understand more about the transmission, which is the part of the engine that is responsible for gear slips.

The transmission transfers power from the engine through the driveshaft to the live axle. A car with a manual transmission features a clutch pedal and a gear shift. The driver is in charge of deciding when to change gears. An automatic transmission changes gears without any input from the driver. Both types of transmissions can slip between gears.

If you’re experiencing this issue, it’s crucial to get it checked out and addressed immediately. To help you understand more about your transmission slipping, Montgomeryville Acura has created this guide with information about causes, signs and what you can do about it.

Causes of Gear Slips

There can be several different problems that can lead to gear slipping. Below we have listed a few of the most common reasons why your transmission slips between gears. If you’re noticing any of the following problems with your vehicle, make sure you take it into a certified service department in the Philadelphia, Lansdale and Doylestown area.

  • Low automatic transmission fluid: This potential cause only applies to cars with automatic transmissions. It’s the most common cause of gear slipping for those driving automatic vehicles.
  • Worn or broken transmission band: In addition to causing your engine to slip between gears, this problem can cause a multitude of other engine troubles, including wearing out the transmission gears.
  • Thinning clutches: The movement of clutches within a manual or automatic transmission eventually wears them down. If the clutches become too thin, they don’t come together properly and the transmission slips.
  • Malfunctioning torque converter: Vertical fins inside the torque converter allow it to maintain pressure and send torque to the transmission. If the fins wear out or break, gear slipping may occur.

Signs of Gear Slips

While it may not always be easy to identify your engine slipping between gears, it’s important that you understand the signs. Being aware of the signs will ensure that you can contact a professional as soon as you identify them. If you’re unsure, watch for these signs:

  • High RPMs: The most common symptom of gear slipping is when the revolutions per minute climb above 3,500 before the gears in an automatic transmission shift up.
  • Quick deceleration: In a car without a transmission problem, you can coast for long distances. If the engine is slipping between gears, it feels as though the engine is in a very low gear, decelerating more rapidly than normal without pushing on the brake.
  • Acceleration delay: When accelerating from a dead stop, a car with transmission trouble may take off very slowly at first, and then lurch ahead after a few seconds of pushing on the gas.

What to do When Your Transmission Slips between Gears

If you’re noticing your transmission slipping between gears, it may be time to replace or repair your transmission parts. There are many other indicators on when to replace your transmission parts, but noticeable signs for part replacement will include fluid leaks, strange smells, grinding or shaking and, most importantly, a check engine light illuminated on your vehicle’s dashboard.

A lot of people also experience transmission slippage or problems when they have not gotten their transmission flushed. If you’re noticing low fluid levels, leaks, torque converter problems or clutch problems, take your vehicle into a mechanic to inquire if a transmission flush will benefit your vehicle.

Checking Your Engine at Montgomery Acura

You can take your car to many different shops to have the transmission fixed, so why should you choose Montgomery Acura over other mechanics in the Philadelphia area? Consider what we offer:

Dealership of Distinction status: We have received the renowned Precision Team Dealer of Distinction status nine times since 2001. This is the most coveted honor Acura can grant its dealerships. It recognizes that we go above and beyond in areas such as customer satisfaction, service, follow-up and business management.

  • Service, maintenance and repairs: We take care of all your Acura vehicle and car care needs in our modern, friendly service department. It’s important to note that Acura vehicles have specific parts not found on other vehicles. That’s why you need an Acura dealership capable of fixing your car, regardless of its production year or how long you have owned it.
  • Convenient hours: We’re open six days a week. Our hours are 7:30 AM to 7:30 PM on Monday thru Thursday, 7:30 AM to 5:00 PM on Friday and 8:00 AM to 4:00 PM on Saturday. Long service hours mean you can bring your Acura in when it’s convenient for you.
  • Certified mechanics: When you bring your vehicle into Montgomeryville Acura to address slipping transmission, you can rest assured that it will be handled properly. Our skilled service team has years of experience working under the hood. Expert mechanics are standing by at Montgomery Acura to serve you.

Now that you’re aware of what slipping gears are, the problems that cause them, and signs to look out for, you’ll be able to identify this issue in your Acura. To have your engine checked by qualified, trained mechanics, please visit Montgomeryville Acura service department today.

We are conveniently located at 1009 Bethlehem Pike in Montgomeryville, PA. Schedule your service appointment with us online today and check out our current service specials!

Leave A Reply